Non Standard Aluminium Vacuum Casting Aluminum Die Casting Street
Lamp Head Radiator
Herong Intelligent Co, Ltd is mainly committed to the development and production of aluminum
die-casting accessories and stainless steel metal transmission
nets, and the company has passed the ISO9001: 2000 quality
management system certification. The company has built-in 400-ton,
250-ton, 160-ton, 125-ton cold die-casting machines, 88-ton hot
die-casting machines, 2 sets of CNC lathes imported from Taiwan,
and several assembly lines.
| ZL108 | ZL108 has high Si content, and Mg, Cu, Mn are added, which makes
the alloy have excellent casting performance, small thermal
expansion coefficient, good wear resistance, high strength, and
good heat resistance. However, the corrosion resistance is slightly
low | It is suitable for making piston of internal combustion engine and
other parts requiring wear resistance, as well as parts requiring
stable size and volume. Die casting and metal mold casting are
mainly used, and sand mold casting can also be used | Die casting, metal mold casting |
| ZL109 | This is a complex alloying Al Si Cu Mg Ni alloy. Due to the
increase of Si content and the addition of Ni, the alloy has
excellent casting performance, air tightness, high temperature
strength, wear resistance and corrosion resistance are also
improved, and the linear expansion coefficient and density are also
greatly reduced, | It is suitable for making internal combustion engine piston and
parts that require wear resistance, stable size and volume. It
mainly uses metal mold casting and sand mold casting. | Sand mold casting, Metal Mold casting, |
| ZL111 | ZL111 is a complex alloying alloy. Due to the addition of Mn and
Ti, the alloy has excellent casting performance, good corrosion
resistance, air tightness and high strength. Its welding and
cutting performance is general | It is suitable for casting power structural parts with complex
shape and bearing heavy load (such as aircraft engine parts, water
pump body parts, oil pump spare parts, impeller, etc.), and other
parts requires good air tightness | Sand mold casting, Metal Mold casting, die casting |
| ZL112 | It has good casting properties and high mechanical properties, and
is mainly used for heavy load engineering structures and other
parts | such as valve housing, impeller, etc. | Sand mold and metal mold casting are mainly used. |
| ZL113 | By removing Zn and Sb from ZL112 Aluminum Die Casting alloy and
adding Ti and Be, the grain of the alloy is refined, and the
harmful effect of Fe is reduced, so that the alloy has good casting
performance, air tightness and high mechanical properties. | It is suitable for casting power structural parts that bear heavy
loads, such as some parts on aircraft and missiles and various
parts on civil products that require good comprehensive
performance. | Mainly used for sand mold and metal mold casting |
Product show
| CHINA | USA AA/ASTM | USA SAE | UK | Japan JIS H 5302 | ISO | EN AC- |
| YL104 YZA1Si10Mg | A360 | 309 | LM 9 | ADC3 | Al-Si10Mg | 43400 |
| YL113 | 383 | 383 | LM 2 | ADC12 | Al-Si10Cu2Fe | 46100 |
| YL112 YZA1Si9Cu4 | A380 | 306 | LM 24 | ADC10 | Al-Si8Cu3Fe | 46500 |
| YL108 YZA1Si12Cu2 | 413 | - | LM 6 | ADC1 | Al-Si12 Al-Si12Fe | 47100 |
| YL102 YZA1Sil2 | A413 | 305 | LM 20 | ADC1 | Al-Si12Cu Al-Si12CuFe | 44300 |
Company Introduction
We want to exceed your expectations by delivering the most
economical solution for your product manufacturing needs. We do
this by constantly evolving what we do, and finding new ways to
improve your current products, that will ultimately drive down
costs and increase overall performance.
With our extensive experience in casting, forging, fabrication and
machining, we can provide the best production method to manufacture
your products. Welcome your inquiry us in any time.
FAQ
1. Can you make casting according to our drawing?
Yes, we can make casting according to your drawing, 2D drawing, or
3D cad model. If the 3D cad model can be supplied, the development
of the tooling can be more efficient. But without 3D, based on 2D
drawing we can still make the samples properly approved.
2. How can I get some samples?
If you need, we are glad to offer you samples for free, but the new
clients are expected to pay the courier cost, and the charge will
be deducted from the payment for formal order.
3. Can you make casting based on our samples?
Yes, we can make measurement based on your samples to make drawings
for tooling making.
4. What's your quality control device in house?
We have spectrometer in house to monitor the chemical property,
tensile test machine to control the mechanical property and UT
Sonic as NDT checking method to control the casting detect under
the surface of casting.
